Center of Gravity Dining Table

the minimalist

Sep 18

1 min read

The Center of Gravity Dining Table was fabricated entirely from Grade 304 stainless steel, combining a brushed circular tabletop with three mirror-finished cylindrical legs.

The process began with the 1200mm diameter tabletop being laser cut from 4.5mm thick Grade 304 stainless steel. Once cut, the edge was prepared and the surface was finished in a brushed finish, creating a consistent directional grain across the tabletop.

The three legs were cut from 154mm diameter round stainless-steel tubing with a 1.5mm wall thickness, each cut to the required height. Separate 3mm thick stainless-steel base plates were laser cut to suit the legs and provide a stable connection between the legs and the floor.

The legs were then prepared and finished to a mirror polish, creating a high-reflective surface that contrasts with the brushed tabletop. Once finished, the base plates were secured to the bottom of each leg and the legs were positioned and aligned beneath the tabletop.

The tabletop was then secured to the three legs, completing the structure and creating the distinctive three-point base of the table.

The final piece combines two contrasting stainless-steel finishes a brushed 4.5mm tabletop with mirror-polished cylindrical legs.